874L
PRESSURE TRANSDUCER 874L
Product description
Amplified pressure sensor with voltage output.
The unit is installed in hydraulic circuits with ¼" BSPP threads.
Typically used for the detection of the pressure in hydraulic circuits of mobile machines.
Rated with IP67 stainless steel housing and Amp Superseal connector.
The unit is installed in hydraulic circuits with ¼" BSPP threads.
Typically used for the detection of the pressure in hydraulic circuits of mobile machines.
Rated with IP67 stainless steel housing and Amp Superseal connector.
Data sheet
INPUT DATA
Measuring range
350 bar
Overload pressure
800 bar
Burst pressure
2000 bar
Thread connection
G ¼ A DIN 3852
Mounting torque
approx. 20 Nm
Parts in contact with media
Stainless steel ; Viton Seal
OUTPUT DATA
Output Signal
0,5 5,5V
Curve deviation at max. setting acc.to DIN 16086 (accuracy class)
0,25 % FS typ. / 0,5 % FS max.
Temperature compensation zero point
0,008 % FS / C typ. / 0,015 % FS / C max.
Temperature compensation over range
0,008 % FS / C typ. / 0,015 % FS / C max.
Linearity at max. setting acc. To DIN 16086
0,3 % FS max.
Hysteresis
0,1 % FS max.
Repeatability
0,005 % FS
Rise time
2 ms
Long-term drift
0,1 % FS typ. / year
ENVIRONMENTAL CONDITIONS
Nominal temperature range
-25 +85°C
Ambient temperature range
-40 +85°C
Storage temperature range
-40 +100°C
Fluid temperature range
-40 +125°C
Protection class acc. DIN 40050
IP67 (if IP67 mating connector properly fitted)
Vibration resistance acc. to IEC 68-2-6 at 10 500 Hz
20 g (196,2 m/s )
OTHER DATA
Supply voltage
9 30V
Residual ripple supply voltage
5 %
Load resistence
2 K
Current consumption
approx. 5 mA typ.
Life expectancy
> 106 load cycle
Weight
ca.55g.
FS Full Scale relative to the full measuring range
CERTIFICATIONS
EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4