I-MODE
INPUT MODULE
Product description
I-MODE is an expansion module, microcontroller operated, with CAN-BUS line and "pass-through" connector. I-MODE offers 32 resources free configurable as input.
Each resource can be electronically set as:
- High active input
- Low active input
- Bulb-type input (variable resistor)
- Ratiometric input (centered at V/2)
Other resource can be set as frequency input.
I-MODE is a flexible and compact unit, ideal for cabin application to "digitalize" dashboard or for control-panel application and for any multiplex application.
Each resource can be electronically set as:
- High active input
- Low active input
- Bulb-type input (variable resistor)
- Ratiometric input (centered at V/2)
Other resource can be set as frequency input.
I-MODE is a flexible and compact unit, ideal for cabin application to "digitalize" dashboard or for control-panel application and for any multiplex application.
Data sheet
CONTROL SYSTEM
Microcontroller
Frescale, 16bit, 25 MHz clock
Flash memory
32 KB
RAM memory
2 KB
CONNECTIVITY
1 CAN-BUS, CAN 2.0B (11 or 29-bit), ISO 11898-2 compliance, speed up to 1 Mbit/s, CAN-OPEN compatible.
ELECTRICAL CHARACTERISTICS
Power Supply
9 30 Vdc (Operates on vehicle power supply directly)
Current requirements for the internal logic
50 mA (without current pumps), max 400mA
MECHANICAL CHARACTERISTICS AND RATINGS
Connectors
2 Molex Minifit 18 and 20 contacts, pin current max. 9A @ 25 C, conductor diameter from AWG28 toAWG16.
Housing
Plastic.
Dimensions
Width 112mm - Depth 63,5mm - Height 28,5mm
Protection
IP20
Operating Temperature Range
form -25°C to +70 °C
Storage Temperature Range
from -35°C to + 85°C
I/O CONFIGURATION
32 configurable INPUT pins, capable to drive up to 0,5A loads. Total current must not exceed 8A.