STP6
THERMAL PRINTER
Product description
STP 6 is a very easy to use 24 columns thermal printer, available for all industrial applications where a prompt paper support is requested for job recording: Loads Weighing tickets, safety checks, diagnostics control support. It is provided with a thermal printing head, fast type, to be used with standard thermal rolls, 57.5m width. STP 6 printer, thanks to its lightness and compact size, can be easily fitted in a wide range of applications. Its customized programming capability make it capable to meet customers specific requirements. Includes a standard interface RS 232 link. An external Power supply, direct current Voltage, is required.
Data sheet
INTERFACE CONNECTORS
STP6 printer is provided with a single RJ11 pins connector including RS232 link.
Is also available a cable with ruggerized connector
Printer
PIN 1 - SIGNAL
+VB Power Supply
PIN 2 - SIGNAL
GND Signal ground
PIN 3 - SIGNAL
RX Serial link input signal
PIN 4 - SIGNAL
TX Serial link output signal
PIN 6 - SIGNAL
GND
CV1 STP6/10 cable connector
PIN A - SIGNAL
Power Supply
PIN B - SIGNAL
RX Input
PIN C - SIGNAL
TX Output
PIN D - SIGNAL
Ground
TECHNICAL DATA
Printer method
Thermal printing
Resolution
203 dpi
Printing speed
> 50 mm/sec typical
Column number
24
Character set
ASCII standard, International
Print format
Normal, Double
Paper width
58 mm
Paper roll dimension
57.5 mm 1 mm
Interface
RS232
Baud Rate
600 to 38.400 bps
Receiver buffer
128 byte
Flash memory
32k
Graphic memory
1 logo of 348 x 85 dot
Power supply
9 30 Vdc
Current consumption
During printing 600mA (idle 20mA)
Dimensions
146 x 88 x 96 (with holding plate)
Weight
605 gr. approx (Printer and holding bracket)
Operating Temperature Range
from -20°C to +70°C
Storage Temperature Range
from -40°C to +80° C
Relative Humidity
from 10% to +90 %
Protection
IP40